TECHNICAL SPECIFICATION | ||||
CR-600 | 60 WATT SOLID STATE PUBLIC ADDRESS AMPLIFIER | |||
Input Power Supply a) AC Mains Operation b) Battery Operation |
Single Phase 240 V, 50 Hz +- 10% 12 V Car Battery |
2amps AC Fuse 10amps DC Fuse |
||
Output Power a) Peak Music b) Rated RMS |
90 watts 80 watts |
|||
Inputs a) Microphones b) Aux- Phone/Type |
4 1 |
Sensitivity 0.6mv 70mv |
Impedance 3.3 K Ohms 300 K Ohms |
|
Frequency Response | 50Hz-16,000 Hz +-2dB | |||
Total Harmonic Distortion | Less Than 2% | |||
Signal/Noise Ratio | Better than 60dB | |||
Controls a) Input gain b) Bass c) Treble d) Master |
Separate gain control for each of the 4 inputs +- 11dB at 100Hz +- 12dB at 10,000 Hz Output Volume Control |
|||
Output Terminations a) Impedance b) Voltage c) Record/Playback |
4,8 and 16 ohms 100V DIN termination (“Line out’-1mv/1K ohms) |
|||
Dimensions (L x D x H) | 360(L) x 275 (D) X 117 (H) mm chassy X 132-with bushes |
|||
Weight | 10.5 Kg. |